Cisco/RCF-X512MYのfdisk実行結果¶

Macの上で実行。こんな風になる。

% sudo fdisk /dev/rdisk2s1
Disk: /dev/rdisk2s1    geometry: 993/16/63 [1001889 sectors]
Signature: 0xAA55
         Starting       Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
 1: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 3: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 4: 00    0   0   0 -    0   0   0 [         0 -          0] unused       
%

Cisco1841の上でフォーマット。

Router#
Flash card inserted in flash. Reading filesystem on the device...
Wait for the completion message before accessing device
Filesystem read completed in flash.
Device in flash available for use

*Aug 10 13:22:06.467: %FILESYS-5-CF: External CompactFlash inserted
Router#

Router#format flash: 
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:".  Continue? [confirm]
Writing Monlib sectors....
Monlib write complete 

Format: All system sectors written. OK...

Format: Total sectors in formatted partition: 1002897
Format: Total bytes in formatted partition: 513483264
Format: Operation completed successfully.

Format of flash: complete
Router#

で、変わる筈だったのだが…。あれ?

% fdisk /dev/rdisk2s1
Disk: /dev/rdisk2s1    geometry: 993/16/63 [1001889 sectors]
Signature: 0xAA55
         Starting       Ending
 #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
------------------------------------------------------------------------
 1: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 2: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 3: 00    0   0   0 -    0   0   0 [         0 -          0] unused      
 4: 00    0   0   0 -    0   0   0 [         0 -          0] unused

変わらない(?_?)

ちなみにフォーマット前のdfの結果は次の通り。

% df -kh
Filesystem      Size   Used  Avail Capacity  Mounted on
/dev/disk0s2   931Gi  484Gi  447Gi    52%    /
devfs          188Ki  188Ki    0Bi   100%    /dev
map -hosts       0Bi    0Bi    0Bi   100%    /net
map auto_home    0Bi    0Bi    0Bi   100%    /home
/dev/disk2s1   489Mi  1.6Mi  487Mi     1%    /Volumes/NO NAME

フォーマット後。

% df -kh
Filesystem      Size   Used  Avail Capacity  Mounted on
/dev/disk0s2   931Gi  484Gi  447Gi    52%    /
devfs          188Ki  188Ki    0Bi   100%    /dev
map -hosts       0Bi    0Bi    0Bi   100%    /net
map auto_home    0Bi    0Bi    0Bi   100%    /home
/dev/disk2s1   489Mi  1.1Mi  488Mi     1%    /Volumes/ｸ

むぐぐ。どうしてこうなった。orz

まあ、Cisco1841は512MBytesのCFカードを挿入しても普通に起動する事が確認できたので、ひとまずは良しとする。Buffalo製のCFカードでも動くことはわかったし。