Actions
Cisco1812JVLan情報の再構築 » History » Revision 1
Revision 1/3
| Next »
Tsutomu KIMURA, 07/14/2013 11:49 PM
前口上¶
滅多にある事ではないが、CFの交換作業をやっているとファイルのうっかりコピー忘れがある。それがVLanデータベースの構成情報を持っているvlan.datだと、目も当てられない事態になる(というか、なった)。
で、復活の仕方である。
復活の仕方
tomcat02#vlan database
% Warning: It is recommended to configure VLAN from config mode,
as VLAN database mode is being deprecated. Please consult user
documentation for configuring VTP/VLAN in config mode.
tomcat02(vlan)#show
VLAN ISL Id: 1
Name: default
Media Type: Ethernet
VLAN 802.10 Id: 100001
State: Operational
MTU: 1500
Translational Bridged VLAN: 1002
Translational Bridged VLAN: 1003
(中略)
VLAN ISL Id: 1005
Name: trnet-default
Media Type: Token Ring Net
VLAN 802.10 Id: 101005
State: Operational
MTU: 1500
Bridge Type: SRB
Bridge Number: 1
STP Type: IBM
長いので略するが、いわゆるデフォルトのVlanインタフェイス以外は存在しない。そこで…
tomcat02(vlan)#? VLAN database editing buffer manipulation commands: abort Exit mode without applying the changes apply Apply current changes and bump revision number exit Apply changes, bump revision number, and exit mode no Negate a command or set its defaults reset Abandon current changes and reread current database show Show database information vlan Add, delete, or modify values associated with a single VLAN vtp Perform VTP administrative functions. tomcat02(vlan)#apply APPLY completed. tomcat02(vlan)#vlan 32 VLAN 32 added: Name: VLAN0032 tomcat02(vlan)#exit APPLY completed. Exiting.... tomcat02#dir flash: Directory of flash:/ (略) 18 -rw- 660 Aug 11 2012 20:56:22 +09:00 vlan.dat (略) 512819200 bytes total (366755840 bytes free)
以上でよい。
要は、
- vlanコマンドでVLan構築モードへ移行。
- applyコマンドを使用する。
これで良い…筈だ。
Updated by Tsutomu KIMURA almost 11 years ago · 1 revisions locked